While the bleeding does indeed to be some kind of design choice, it's completely unacceptable for audiophiles or sound designers who want to create and listen to stereo tracks the way they are designed to sound. The fact that you can't turn this off is outrageous and is the kind of thing Mac users would point and laugh at us for, "Aw, should have bought a Mac".
Realtek High Definition Audio Driver Stereo Mix For Mac
On another forum, there are users that have replaced the Realtek audio driver with the generic, basic function, Windows installed "High Definition Audio" driver. This is a "band aid" but fixes some strange problems. These were various brands, not Dell. You can try that and see if makes a difference, if its not a pure hardware issue. Uninstall the Realtek in the Device Manager and also uninstall the Realtek drivers. Reboot the PC and if lucky Windows will install the High Definition Audio. Be aware the High Definition driver does not have "Stereo Mix" and jack detection.
I wouldn't bother going to such a forum. They'd probably just say "That's weird. I don't have that computer, so idk".I worked on Macs at University and didn't have this problem. More recently, on another Apple product, an iPhone Touch, I tried playing an iOS game that I did the sound for and for which I programmed hard pans to the right and left depending on user input- these work correctly, so iOS at least doesn't do any cross-channel bleeding/mixing.If you review the thread in which you yourself were a participant, you'll note that this issue has nothing to do with the way the files are made, since testing was done with YouTube videos that explicitly provide a Left and Right channel test. I tested with these videos as well as the software I use, and I assure you, the problem is quite real, quite outrageous and apparently specific to this audio driver (cf. the above linked thread, where @tvaudioman tells of his encounter with a coworker who made the same remark about his Dell.
Installs the Realtek* High Definition Audio Driver and Intel Smart Sound Technology (Intel SST) driver for the 3.5mm audio jack and the speakers for Windows 11* for the Intel NUC12SN Products. This audio driver is required if you plan to connect a microphone or headset to the audio jack.
Logitech features everything from high-end surround-sound speakers to easy, affordable stereo speakers. With multiple ways to connect, Logitech wired and Bluetooth speakers are easy to set up and play in your living room, bedroom, kitchen, home office, and more. Various speakers connect via a 3.5 mm audio jack, RCA, optical, Bluetooth, or USB. Logitech speakers can be used for just about anything, from work to your entertainment system. Use them to take your favorite movies, shows, or PC and console games to the next level.
To choose the default audio source, highlight the device you want to use and click Set Default. Most applications will automatically use the default device to record sound, but some (particularly voice-dictation software) require that you choose a source separately in the application itself. If you speak to your mic, the mic level should rise real time:
In general, higher sound quality consumes more bandwidth and server CPU utilization by sending more audio data to user devices. Sound compression allows you to balance sound quality against overall session performance; use Citrix policy settings to configure the compression levels to apply to sound files.
By default, the Audio quality policy setting is set to High - high definition audio when TCP transport is used. The policy is set to Medium - optimized-for-speech when UDP transport (recommended) is used. The High Definition audio setting provides high fidelity stereo audio, but consumes more bandwidth than other quality settings. Do not use this audio quality for non-optimized voice chat or video chat applications (such as softphones). The reason being that it might introduce latency into the audio path that is not suitable for real-time communications. We recommend the optimized for speech policy setting for real-time audio, regardless of the selected transport protocol.
When the bandwidth is limited, for example satellite or dial-up connections, reducing audio quality to Low consumes the least possible bandwidth. In this situation, create separate policies for users on low-bandwidth connections so that users on high-bandwidth connections are not adversely impacted.
By default, Audio over User Datagram Protocol (UDP) Real-time Transport is allowed (when selected at the time of installation). It opens up a UDP port on the server for connections that use Audio over UDP Real-time Transport. If there is network congestion or packet loss, we recommend configuring UDP/RTP for audio to ensure the best possible user experience. For any real time audio such as softphone applications, UDP audio is preferred to EDT. UDP allows for packet loss without retransmission, ensuring that no latency is added on connections with high packet loss.
The bidirectional Citrix Audio Virtual Channel (CTXCAM) enables audio to be delivered efficiently over the network. Generic HDX RealTime takes the audio from the user headset or microphone and compresses it. Then, it sends it over ICA to the softphone application on the virtual desktop. Likewise, the audio output of the softphone is compressed and sent in the other direction to the user headset or speakers. This compression is independent of the compression used by the softphone itself (such as G.729 or G.711). It is done using the Optimized-for-Speech codec (Medium Quality). Its characteristics are ideal for Voice over Internet Protocol. It features quick encode time, and it consumes only approximately 56 Kilobits per second of network bandwidth (28 Kbps in each direction), peak. This codec must be explicitly selected in the Studio console because it is not the default audio codec. The default is the HD Audio codec (High Quality). This codec is excellent for high fidelity stereo soundtracks but is slower to encode compared to the Optimized-for-Speech codec.
Issue: Attempting to install RealTek Audio Drivers for Windows 10 leads to an endless uninstall/install loop. This happens with RealTek audio drivers from manufacturers like Lenovo, Dell, HP, Asus or directly from RealTek. The install loop happens due to the new Windows 10 Driver Updates from Microsoft.
Drivers are essentially pieces of software that allow other types of software to talk to the hardware on a computer. They affect different aspects, so you might have one set of drivers that talk to the keyboard drivers, another that talk to the video drivers, and a third to the audio set-up, etc. You need to keep them updated to ensure they're working effectively, which is why you might think of downloading Realtek Audio Drivers.
Depending on your computer, interacting with your drivers will be more or less easy. Some users will be able to use a Windows Store app called Realtek Audio Console. Others will need to interact with the drivers by accessing the Realtek program files and opening RtkNGUI64, while yet more people will need to access the Realtek Audio HD manager via the control panel. This variety of options is confusing, and the fact that it is hard to know which one will work for you means that only users who are very interested in their audio set-up will bother following it through to the bitter end.
For the rest of us, editing Realtek HD Audio Drivers will seem like a boring step too far. If you think that might be you, ignore them and cross your fingers your audio never gives you any trouble. You might get lucky, and be able to sidestep driver confusion completely.
With hardware that uses the snd_hda_intel kernel module, rare bugs can cause the sound card to not be detected. If you're having this issue, try running these commands to force the usage of a specific audio driver: 2ff7e9595c
Comments